Luxul XAP-1230 Manuel d'utilisateur télécharger pdf (Page 7)

User Guide

Other trademarks and registered trademarks are the property of their respective owners



The XAP-1230 contains no user-serviceable parts. If the access point is not working

properly, contact your dealer and ask for help. DO NOT attempt to disassemble the

access point.

4 HARDWARE FEATURES AND INSTALLATION

4.1 Front View

The XAP-1230 has four LEDs. LEDs indicate 1) Power, 2) WLAN Status 3) LAN Link/

Activity, and 4) Bridge Mode.

NOTE: The LEDs may be enabled or disabled through the user

interface. The LEDs are enabled by default.

XAP-1230 Front View

Status Indicators:

The following table describes the LED functionality:

Indicator Name Description

Bridge Mode

Flashing/

Bridge Mode is enabled /Bridge is connected

Off The AP is in default “Access Point” mode.

WLAN Status

On The wireless radio is active and wireless access is

enabled an active connection to the internet

Off The wireless radio is not active and wireless access

is disabled

LAN Link/Activity

Flashing /On There is an active Ethernet connection

Off AP is not connected to an Ethernet device

Power

On The power is on

Off No power, check power connections

At startup, the Green Power LED will stay on while the amber LAN Link light ﬂ ashes. The

blue LED will come on once the XAP-1230 radio is active. If Bridge Mode is enabled the

Bridge LED will ﬂ ash then go solid once successfully connected.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Pas de commentaire

Luxul XAP-1230 Manuel d'utilisateur Page 7