Luxul XAP-1230 Manuel d'utilisateur télécharger pdf (Page 16)

XAP-1230

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XAP-1230 Vers: 07314



Wireless Mode: Sets the type of 802.11 wireless network to be broadcast.

Available modes are:

11g (802.11g)

11n+g (802.11g/n with 20MHz or 40MHz channels)

The default setting is 11n+g, and is recommended to allow all types of devices to con-

nect to the network. Use the 11g Mode ONLY if there are 802.11b/g client devices in the

network that will not connect in 11n+g Mode.



Channel Width: Sets the width of the 802.11n channel. Available widths are:

20MHz (available for both modes)

20/40MHz Auto (only available for 11n+g mode)

The default (and recommended) setting is 20MHz to provide maximum performance

to all client devices and to avoid any potential client issues.



Channel: This ﬁeld allows the user to set which 2.4GHz channel to use. For 2.4GHz,

the default is set to Channel 6 and is the recommended setting however any other

channel (1-11) may be selected. To change the Channel, click the dropdown menu,

select the desired channel, then click Save and then Reboot for the change

to take effect.

NOTE: 11g+n 40MHZ mode will use two channels. For example, if radio is

using channel 6, it would also use channel 10.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Pas de commentaire

Luxul XAP-1230 Manuel d'utilisateur Page 16