Luxul XAP-1230 Manuel d'utilisateur télécharger pdf (Page 8)

XAP-1230

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XAP-1230 Vers: 07314

4.2 Rear View

The back of the XAP-1230 provides one RJ-45 connection. This port is used to deliver

both power and data to the access point.

The reset button is also located on the back of the AP for restoring the access point to

factory default settings.

XAP-1230 Rear View

To Restore the Default Settings:

With the XAP-1230 powered on, press and hold the Reset button for 15 seconds. Release

the reset button. The XAP-1230 will reboot and be reset to factory defaults.

CAUTION: Please note that pressing and holding the Reset button will

remove any custom conﬁ gurations done to the XAP-1230.

4.3 Environmental Requirements



Ethernet cable to PoE injector to provide Power and Data to the XAP-1230.



A device with a Web browser. Supported Web browser versions include Microsoft IE

9.0 and up, Safari 5.1 and up, Mozilla Firefox 24 and up, and Google Chrome 18 and up.

The Web browser is used to conﬁ gure the XAP-1230.



The XAP-1230 uses 48VDC power. The PoE injector power supply requires AC 100V ~

240V, 50Hz ~ 60Hz.



Temperature of the operating environment: 32F~131F (0C~55C). Be sure to place the

access point away from heat generating devices.



Humidity of the operating environment: 5%-95% non-condensing. Do not place the

access point in an extremely dirty or damp location.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Pas de commentaire

Luxul XAP-1230 Manuel d'utilisateur Page 8