Luxul XAP-1230 Manuel d'utilisateur télécharger pdf (Page 4)

XAP-1230

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XAP-1230 Vers: 07314

1 INTRODUCTION

Congratulations on your purchase of the Luxul XAP-1230 - High Power Wireless

Commercial Grade Access Point. The XAP-1230 is designed for use in residential and

commercial Wi-Fi installations—delivering optimal wireless network performance. With

this high powered, single-band wireless access point, wireless devices that are compat-

ible with 802.11b/g/n can sustain high data rates and improved overall performance at

signiﬁcantly greater distances.

The XAP-1230 features Luxul’s web based management interface. Provides a simple

method for setting up the wireless network. The XAP-1230 is also enabled for instal-

lation simplicity when installed with Luxul Routers, Gigabit Switches, and other Luxul

products.

XAP-1230 Features:



Highest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching

Signal and Maximum Data Rates



Complies with IEEE 802.11n Standard. Backward Compatible with IEEE 802.11b/g



Supports WMM QoS Functionality to Prioritize Multimedia Trafﬁc



Enhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK (AES),

WPA-PSK/WPA2-PSK Personal (TKIP) 64 and 128-bit WEP



Supports up to 8 SSIDs - 8 on 2.4GHz Individual Security Settings



Multiple SSIDs Support with VLAN Tagging (1 VLAN per SSID)



Single Cable Installation with PoE (requires the use of enclosed injector) or

802.at PoE switch/midspan



Firmware Upgradeable



Easy 3 Step Setup through Web-based User Interface



Enabled for Maximum Compatibility and Performance with

other Luxul Products



Install on table/desk, Wall or other ﬂat surface

1.1 Warnings



Read all installation instructions and site survey reports, and verify correct

equipment installation before connecting the XAP-1230 to its power source.



Connect all power cords to a properly wired and grounded electrical circuit.



Verify that the electrical circuits have appropriate overload protection.



Verify there is adequate ventilation around the device, and that ambient

temperatures meet equipment operation speciﬁcations.



Products outside the approved conﬁgurations may be in violation of

Part 15 of the FCC Rules.

1 2 3 4 5 6 7 8 9 ... 27 28

Commentaires sur ces manuels

Pas de commentaire

Luxul XAP-1230 Manuel d'utilisateur Page 4

Commentaires sur ces manuels

Produits connexes et manuels pour Routeurs Luxul XAP-1230