Luxul XAP-1230 Manuel d'utilisateur télécharger pdf (Page 12)

XAP-1230

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XAP-1230 Vers: 07314

5.2 Quick Setup

Quick Setup: For most installations, the Quick Setup page will be sufﬁ cient to

conﬁ gure the XAP-1230. The Quick Setup page consists of the following:



DHCP Client: Enabled or Disabled. DHCP (Dynamic Host Conﬁ guration Protocol) is

used to automatically assign an IP Addresses to a device on the network. If DHCP

is enabled on the Access Point, it will no longer use the static address set by Luxul

at time of manufacturing and will request a Dynamic IP Address from the Router

(sometimes referred to as the Gateway).

When DHCP is enabled on the Access Point, the new IP Address assigned will be

needed in order to access the web management interface. The router web interface can

be used to look up the IP Address assigned to the Access Point. To

Enable DHCP, click on the drop down menu and select Enable. Select Apply and then

Reboot for the change to take effect.

NOTE: DHCP is set as Disabled by default and is the recommended setting.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Luxul XAP-1230 Manuel d'utilisateur Page 12