Luxul XMS-1024 Manuel d'utilisateur télécharger pdf (Page 7)

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

Optical ﬁ ber/cable should be selected based on the wavelength of the SFP

optical module to be used.

Make sure only one Uplink channel exists between switches or between the XMS-

1024 and a router. Otherwise, loops can occur and result in network failure.

Default IP Address

The XMS-1024 default IP address is 192.168.0.2. This address can be changed.

However, for hassle free installation of other plug and play Luxul devices, it is

recommended that the default IP value be maintained.

The XMS-1024 is not equipped with internal an DHCP server. However, if your

switch is connected to a Luxul Router conﬁ guration will be automatic. Otherwise,

the IP address of the computer for login and conﬁ guration will need to be manually

conﬁ gured. The table below lists the default parameters of the XMS-1024.

Parameter: Default Value

Default IP address:

192.168.0.2

Default user name:

admin

Default password:

admin

1. Plug an Ethernet cable into any of the ports of the switch

2. Plug the other end into the Ethernet port of your computer

3. Power on the switch

4. Check to see that the IP address of the computer is within this network

segment: 192.168.0.xxx (“xxx” ranges 1~254). For example, 192.168.0.100.

5. Open the Web browser, and enter 192.168.0.2. The switch login window

appears.

6. Enter the user name and password (default user name and default password

are both set as “admin”), and then click “OK” to login to the switch

conﬁ guration window.

ADVANCED SETTINGS

For login and advanced settings information go to luxul.com

1 2 3 4 5 6 7 8

Pas de commentaire

Luxul XMS-1024 Manuel d'utilisateur Page 7