Luxul XMS-1024 Manuel d'utilisateur télécharger pdf (Page 6)

Quick Install Guide

XMS-1024

14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-QIG-XMS-1024 0829140311

Rack-Mounting the XMS-1024

Using the included screws, attach the mounting ears to each side of the switch.

Mount the switch in the rack with the LEDs facing outwards. Be sure the switch is

level and properly secured within the rack.

Desktop Setup

For use as a desktop device, position and apply the included rubber feet to the

bottom of the XMS-1024.

Attaching the Rubber Feet to the XMS-1024

Network Connections:

The XMS-1024 supports 10/100/1000 Mbps Ethernet; 10/100 Mbps half/full-

duplex mode and 1000 Mbps full-duplex mode. All RJ-45 ports support Auto MDI/

MDIX and can be used as ordinary ports or as Uplink ports. Any RJ-45 port can be

used to connect the XMS-1024 to an Ethernet enabled device (including servers,

routers, and other switches) without a crossover cable.

The XMS-1024 offers 4 shared SFP optical module expansion ports. Once the

Gigabit SFP optical modules are inserted, these interfaces can support optical ﬁ ber

cables to extend the Gigabit network—enabling the network to reach beyond the

300 foot limitation of twisted pair Ethernet.

For the RJ-45 ports, Category-5, super Category-5 or Category-6 unshielded twisted

pair (CAT5/CAT5e/CAT6 UTP) can be used.(For best results, it is recommended

that Category-6 shielded twisted pair be used to ensure stable data transmission at

1000 Mbps).

1 2 3 4 5 6 7 8

Pas de commentaire

Luxul XMS-1024 Manuel d'utilisateur Page 6