Luxul XBR-4400 Manuel d'utilisateur télécharger pdf (Page 6)

Quick Install Guide

XBR-4400

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-QIG-XBR-4400 029151011



Mount the router in the rack with the LEDs facing outwards. Be sure the

router is level and properly secured within the rack.

Desktop Setup

For use as a desktop device, position and apply the included rubber feet to the

bottom of the XBR-4400.

Attaching the Rubber Feet to the XBR-4400

CONNECTING DEVICES

Before installing the XBR-4400, test the Internet connection to validate that it is

functioning properly. When Internet access has been conﬁrmed, follow the steps

below for Router installation.

1. Establish LAN Connection: Connect one of the four XBR-4400 LAN ports

to a switch, access point, or computer

2. Establish WAN Connection: Connect the Internet cable to WAN 1 of the

XBR-4400 WAN ports

3. Connect AC Power: Connect the included AC power cable to the XBR-4400

ﬁrst and then to the AC outlet.

NOTE: By default WAN 1 and LAN 1-4 are conﬁgured. The XBR-4400

must be conﬁgured to provide additional WAN ports if needed.

Default IP Address

The XBR-4400 default IP address is 192.168.0.1. This address can be changed.

However, for hassle free installation of other plug and play Luxul devices, it is

recommended that the default IP value be maintained.

Connecting a Client Device

Connect the client device to one of the XBR-4400 LAN ports or to a switch that is

connected to a XBR-4400 LAN port. The DHCP server on the XBR-4400 is conﬁg-

ured by default. If your client device is set to obtain an address automatically, no

further conﬁguration is required.

1 2 3 4 5 6 7 8

Pas de commentaire

Luxul XBR-4400 Manuel d'utilisateur Page 6