Luxul XBR-2300 Manuel d'utilisateur télécharger pdf (Page 10)

XBR-2300

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XBR-2300 Vers: 07314

2. Establish WAN Connection: Connect the Internet cable to one of the XBR-2300

WAN ports

3. Connect AC Power: Connect the included AC power cable to the XBR-2300 ﬁrst and

then to the AC outlet.

4.6 Default IP Address

The XBR-2300 default IP address is 192.168.0.1. This address can be changed. However, for

hassle free installation of other plug and play Luxul devices, it is recommended that the

default IP value be maintained.

4.7 Connecting a Client Device

Connect the client device to one of the XBR-2300 LAN ports or to a switch that is

connected to a XBR-2300 LAN port. The DHCP server on the XBR-2300 is conﬁgured

by default. If your client device is set to obtain an address automatically, no further

conﬁguration is required.

4.8 Verifying Connectivity

After automatic conﬁguration of the TCP/IP parameters, the ping command can be used

to check connectivity between the XBR-2300 and the client device.

Windows Devices:

1. Select Start >> Run input cmd in the Run line then press enter.

2. At the newly opened command interface enter the following command: ping

192.168.0.1 and press enter. If connected properly, the system should report back a

result as follows: packets sent=4, packets received=4, packets lost=0. This means the

device is connected with a valid IP address.

5 CONFIGURATION

5.1 Login

This section introduces the conﬁguration of the XBR-2300 Commercial Grade

Dual-WAN Router functions via the Web-based management interface.

The table below lists the default parameters of the XBR-2300.

Parameter:

Default Value

Default IP address:

192.168.0.1

Default user name:

admin

Default password:

admin

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Pas de commentaire

Luxul XBR-2300 Manuel d'utilisateur Page 10