Luxul XBR-2300 Manuel d'utilisateur télécharger pdf (Page 7)

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

Verifying Connectivity

After automatic conﬁguration of the TCP/IP parameters, the ping command can be

used to check connectivity between the XBR-2300 and the client device.

Windows Devices:

1. Select Start >> Run input cmd in the Run line then press enter.

2. At the newly opened command interface enter the following command: ping

192.168.0.1 and press enter. If connected properly, the system should report back a

result as follows: packets sent=4, packets received=4, packets lost=0. This means

the device is connected with a valid IP address.

Parameter Default Value

Default IP address

192.168.0.1

Default user name

admin

Default password

admin

1. Plug an Ethernet cable into any of the three LAN ports of the router

2. Plug the other end into the Ethernet port of your computer

3. Power on the router

4. Check to see that the IP address of the computer is within this network segment:

192.168.0.xxx (“xxx” ranges 2~254). For example, 192.168.0.100.

5. Open the Web browser, and enter 192.168.0.1. The router login window appears,

as shown below.

6. Enter the user name and password (default user name and default password

are both set as “admin”), and then click “OK” to login to the switch conﬁguration

window.

1 2 3 4 5 6 7 8

Pas de commentaire

Luxul XBR-2300 Manuel d'utilisateur Page 7