Luxul XAP-1500 Manuel d'utilisateur télécharger pdf (Page 8)

XAP-1500

a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-UG-XAP-1500 Vers: 07314

4.2 Rear View

The back of the XAP-1500 provides two RJ-45 connections. The ﬁ rst port is used to

deliver both power and data to the access point and is labeled PoE. The second port is

optional and may be used as a switch port to connect any other device to the network.

The reset button is also located on the back of the AP for restoring the access point to

factory default settings.

XAP-1500 Rear View

To Restore the Default Settings:

With the XAP-1500 powered on, press and hold the Reset button for 15 seconds. Release

the reset button. The XAP-1500 will reboot and be reset to factory defaults.

CAUTION: Please note that pressing and holding the Reset button will

remove any custom conﬁ gurations done to the XAP-1500.

4.3 Environmental Requirements



Ethernet cable to PoE injector to provide Power and Data to the XAP-1500.



A device with a Web browser. Supported Web browser versions include Microsoft IE

9.0 and up, Safari 5.1 and up, Mozilla Firefox 24 and up, and Google Chrome 18 and up.

The Web browser is used to conﬁ gure the XAP-1500.



The XAP-1500 uses 48VDC power. The PoE injector power supply requires AC 100V ~

240V, 50Hz ~ 60Hz.



Temperature of the operating environment: 32F~131F (0C~55C). Be sure to place the

access point away from heat generating devices.



Humidity of the operating environment: 5%-95% non-condensing. Do not place the

access point in an extremely dirty or damp location.

First port delivers both

power and data

Second port is optional

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Pas de commentaire

Luxul XAP-1500 Manuel d'utilisateur Page 8