Luxul XAP-310 Manuel d'utilisateur télécharger pdf (Page 5)

Simply Connected

Other trademarks and registered trademarks are the property of their respective owners

XAP-310 mounted on a ceiling XAP-310 mounted on a wall

Desktop Installation

Place on any ﬂ at surface

XAP-310 on a desktop or ﬂ at surface

Connecting the Ethernet Cable

With the XAP-310 properly mounted, you can now plug the Ethernet Cable into the

RJ-45 connector.

NOTE: Category-5, super Category-5 or Category-6 unshielded twisted

pair (CAT5/CAT5e/CAT6 UTP) cables can be used. For best

results, it is recommended that Category-6 shielded twisted pair

be used to ensure stable data transmission at highest data rates.

Connecting to the Power Source

The XAP-310 is PoE ready and supports 802.3af PoE. A PoE injector is included with

the device. To apply power, simply connect the opposite end of the Ethernet

cable to which the access point is already connected to the provided PoE injector

or other PoE switch or injector. An Ethernet cable length of up to 300 feet can be

used. DO NOT yet apply power to the PoE injector or switch.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Luxul XAP-310 Manuel d'utilisateur Page 5